Heat setting stenter

YXLD2800 hot air stenter is mainly used for the cotton,polyester,wool,hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.

Technical flow:

open width fabrics infeed--infra red expanding and centering--padder--zidond  lower overfeeding--screw expanding--machincial weft straigtner---upper overfeeding--edge spreader--infra-red inspector--pin on--heat setting---coolant---pin off--exit--plaiter or rolling

Mainly technical parameters

Machine working pattern :chains circulation horizontal rotary  

Heat setting pattern:hot air circulation

Chains pattern:pitch 60mm,stainless steel chains. 

Rail pattern stainless steel rail,graphite strip,non oil lubrication  

Machine standard power:380V(±5%)50Hz3PH

Control power:220V?24V

Applicable steam specification:3-6Kg/cm²saturated steam 

Steam comsumption :100~150kg/hour

Applicable compressed air specification:0.3-0.6Mpa compressed airwithout moisture

Maximum temperature of the heating chamber: 220?

Applicable heat sourch

A. Circulation thermal oil

B. 2Kpa-3.5Kpa natural gas

Circulation oil consumption:80000-140000Kcal/ H·chamber(0.33-0.6GJ)

Natural gas consumption:8-15m³/H·chamber(about6.5-12KG)

Main chain driven pattern:right and left chains drive seperately

Working width control pattern: working width of each chamber adjust seperately 

Air delivery pattern of the heating chamber: upper blower chamber and lower blower chamber control air volume seperately.

Pin plate maximum working width:2000mm-3000mm

Heating chamber width:3000mm/chamber

Machincial speed:5~80m/min

Power of some parts: 

Padder:12.5kw

Gluming,cutting,sucking device 6.74 KW(optional)

Pneumatic edge spreader 3KW        

Driven device 45 KW

Each chamber power: 15.75kw

Machine dimension(Max) L=18000+3000mm/chamber*Nchamber

W=2700+working width

H=3000

Machine weight: about 12tons+4.5ton/chamberxN chamber

Machine colour:jewelry blue + Crystal White 

Insulated pannel thickness:150mm 

After sale service: in time,steady and reliable:

1.If customer needs to install the machine by us,we will dispatch our engineer to commission the machine and train the operators. 

2.Machine warranty period is one year,within one year,all parts broken are free of charge,after one year,all parts will be charged in cost.

3.Machine after sale service will be entirely lifespan,if faulty happens,we will react within 8 hours(working time) once receive the message from customer.

4.If machine has problem,firstly will communciate through email,video or telephone,if can not solve the problem,We will offer on-spot service. customer should afford round tickets and salary USD100 per day. 

5.If customer meets processing difficulties,we can offer instructure and solution freely,if customer can afford charges,we can go to the spot to give assistant and help.

6. Establish customer file,warn customer to replace the spare parts in time.

 

• 
• 
•